nova
IMG_7305
IMG_7304
IMG_7308
 
 
5 out of 5 based on 2 customer ratings
(2 customer reviews)

NOVA

€ 46,95

INTERNATIONAL FLAT RATE SHIPPING // € 3.99
EU 5 DAYS // NORTH AMERICA 10 DAYS

propeller size: up to 5.5 inch
camera: micro’s from 40-60°
motor to motor: 220mm
flight controller: 30.5mm and 20mm hole pattern
stack space: 25mm
motor: 16x19mm screw pattern
screws: stainless steel torx t10

  • space for capacitor
  • strain relief for lipo cable
  • optional axii mount

~66g

In stock

Qty

FLEXIBLE CANOPY WITH SUPPORT RIBS

KEEPS YOUR MICRO CAM SAFER

QUICK SWITCH - TIGHT FIT ARMS

JUST RELEASE ONE SCREW

LIPO STRAP SLOT

EXTRA SPACE - LESS WEIGHT

FINEST CARBON CUT RIGHT

ALONG THE WEAVE FOR IMPROVED STIFFNESS

BEST HARDWARE

STAINLESS STEEL AND ALUMINIUM

NOT STANDARD - BETTER SCREWS

TORX TX10: MORE TORQUE - LESS POTENTIAL DAMAGING

OPTIONAL - AXII MOUNT

LUMENIER AXII U.FL MOUNT - INDESTRUCTIBLE

PACKAGE CONTENTS

Sample Configuration

Motors: BrotherHobby Returner R5 2207 2400KV https://goo.gl/34HcRv
ESCs: Hobbywing XRotor Micro 40A https://goo.gl/5iFrSS
Flight Controller: Matek F405-OSD https://goo.gl/y9TnHC
FPV Camera: Runcam Swift Micro https://goo.gl/hnsf7Q
FPV VTX: Matek 5.8G 40CH https://goo.gl/ZqncAf
Propellers: Gemfan Flash 5152 https://goo.gl/CZEk6S
Lipo: Infinity 1500mah 14.8V 90C 4S1P https://goo.gl/DF9B58
Radio: FrSky ACCST Taranis Q X7 https://goo.gl/WULYuD
Receiver: Frsky XM+ Micro D16 SBUS Full Range Receiver https://goo.gl/ZeDRNa

2 reviews for NOVA

  1. 5 out of 5

    (verified owner)

    Beautyful frame!!! Very light and high quality carbon. Perfect if u use the hglrc f440 stack but u have to use shrinking tubes to get from m2 to the m3 holes.

  2. 5 out of 5

    (verified owner)

    I’ll add another five Star rating. I have two builds now running and two to come. It’s tight in there but careful picking of components results in a beautifully flying quad. It’s speed borders on insanity and it is also quite durable. It has just about the right stiffness in the arms to prevent breaking and flex off heavy impacts. The new SnD designs are definitely an improvement to the old Hooligan frames from early 2017.

    I experimented a lot this spring and I think I have found my Frame for 2018.

    My setup is:
    Frame: Nova
    Motors: Amax Inno 2306 2700kv (will switch to T-Motor F40 Pro II soon)
    Propellers: Gemfan Hulkies 5055×3
    ESC: Hobbywing 4in1 BLHeli_S
    FC: (Hobbywing Omnibus F4SD target) / BrainFPV Radix
    RX: XM+
    VTX: Unify Nano
    Cam: Runcam Sparrow Micro
    Antenna: Dipole Antenna included with the nano (You can use the soldering iron to “punch through” a hole in the Canopy to fit the dipole)

    The Quad is fired By SLS NOC 1300 mAh regular sized Batteries.

    With these setups I get around 275 to 282g dry weight (without lipo) With the planned T-Motors The weight will be reduced by around 12g and should be right where I want it.

Only logged in customers who have purchased this product may leave a review.

Category: